7
1) All fixed parts of the machine are sealed. They are
permanently lubricated and require no maintenance.
2) Clean and remove all dust and wood chips from the
surroundings and under the base of the machine periodically.
Even if there are consoles to allow this waste to drain, dust will
accumulate.
3) The sets of screws are designed to provide several years of use.
MAKSIWA guarantees to the owner of the equipment, identified
by the issuing date on the purchasing invoice, guarantee of 1
(one) year, in the following terms:
1) The warranty period starts on the date of issue of the invoice,
provided by the dealer.
2) Within the warranty period, labor and components replaced
due to manufacturing defects will be provided free of charge,
provided they are duly proven by Maksiwa Technical Assistance.
3) Equipment manufactured by third parties that make up
MAKSIWA equipment (such as motors, electrical equipment,
belts, etc.) are subject to the conditions and warranty terms of
their respective manufacturers.
4) In case of exchange during the warranty, please return the
defective part to the manufacturer urgently.
5) Expenses and transportation risks, both ways, will be paid by
the equipment owner.
6) Expenses for installing the equipment, as well as adaptations of
the workplace are at the expense of the equipment owner. If you
notice any defect or malfunction when you receive the equipment,
immediately contact the manufacturer or the dealer. Do not turn
on the equipment.
7) Technical visits for cleaning or adjustments caused by wear and
tear caused by normal use of the equipment are not included in
this guarantee.
8) The warranty does not cover problems caused by mistreatment,
carelessness, misuse or inappropriate use
MAINTENANCE
TECHNICAL ASSISTANCE
the intended functions of the equipment contained in this
manual, as well as operations poorly performed by operators not
trained to operate it.
10) MAKSIWA is not responsible for lost productivity, direct or
indirect damage, caused to the equipment owner or third parties,
or any other expense, including lost profits.
11) Even during the warranty period, it may lose its validity under
the following conditions:
a) Application of non-original components;
b) Alteration of the original characteristics;
c) Lack of adequate maintenance;
d) Inappropriate use of the equipment;
e) Alteration of equipment or electronic connections
f) Damage caused by mechanical shocks or by exposure to
improper conditions (humidity, salt air, corrosive agents, etc.);
g) Damage caused by bad weather (floods, floods, lightning, power
outages, etc.).
For your greater safety, entrust repairs, maintenance and
adjustments (including inspection and replacement) only contact
technical assistance recommended by MAKSIWA, which will
always use genuine spare parts and accessories, reassembling your
machine in the same way as the original.
