The inlet can now be placed on the intake hole of the fan/motor assembly as
shown Fig 7.
Fig 7
The dust collector is now ready to be placed into service. Before connecting to
a power source, be sure the power source is properly grounded and is of
proper voltage and amperage.
SAFETY RULES
1. Read and become familiar with the entire operating manual.
2.Keep guards and cover in place and in working order.
3.Wear eye protection at all times. Use safety glasses with side shields or
safety goggles, meeting the national safety standards, while operating this
machine.
4. Keep work area clean and well lighted. Clutter and inadequate lighting invite
potential hazards.
5.Ground all tools. If a machine is equipped with a three-prong plug, it must be
plugged into a three-hole electrical outlet or grounded extension cord. If
using an adapter to aid in accommodating a two hole receptacle, ground
using a screw to a known ground.
6. Avoid dangerous environments. Do not operate this machine in wet or flame
environments. Airborne dust particles could cause an explosion and severe
fire hazard.
7. Make sure switch is in the
“
OFF
”
position before connecting power to
machine.
8. Keep children and visitors away. All visitors should be kept a safe distance
away while operating unit.
9. Childproof workshop with padlocks, master switch or by removing starter
keys.
5
10. Disconnect machine when cleaning, adjusting or servicing.
11. Do not force tool. The machine will do a safer and better job at the rate for
文件使用
"pdfFactory Pro"
试用版本创建
www.fineprint.cn
