Turning on the Device
Press and release the Green on/off (+) button once.
The LED will light up and a long warning tone will be
heard. Makro Pointer is ready for use. Be sure there are
no metal objects around at start up.
Mode Change
Press the Red (-) button for 3 seconds. A short warning
tone will be heard. The device will switch from the
audio mode to the vibration mode. When pressed
and held again, it will switch to the audio and vibration mode. If
pressed again, it will revert back to the audio mode. A short
warning tone will be heard with each mode change. Makro
Pointer will start at the same setting the next time you start up
the device.
Sensitivity Increase
Double click the Green on/off (+) button to increase
sensitivity. Sensitivity has 4 levels. The factory preset
setting is level 3. The device indicates the sensitivity
level with the number of warning tones. Makro Pointer will start
at the last adjusted sensitivity level at start up.
Turning off the Device
Press and hold the Green on/off (+) button. Six (6)
short warning tones will be heard and the device will
turn off.