MAINTENANCE & CLEARING:
Before any work commences on the Jig Saw, ensure that it is unplugged from the power outlet.
For optimum use, regularly check to see if any dust or foreign matter has entered the ventilations slots
near the motor and around the on/off switch. Use a soft brush if required. Wear safety glasses to
protect your eyes whilst cleaning.
Clean around the chuck and guide roller.
If the body of the tool needs cleaning, wipe it with a soft damp cloth. A mild detergent can be used but
not alcohol, petrol or other cleaning agents.
Never use caustic agents to clean plastic parts.
Lubricate all moving parts at regular intervals.
If the supply cord is damaged, it must be replaced with the correct part by an authorised
service agent to avoid a safety hazard.
CAUTION
Water must never come into contact with the tool.
DISPOSAL
Do not dispose of electrical appliances with your domestic waste!
The packaging
comprises exclusively environmentally- friendly material. Dispose of it in your local
recycling containers.
TECHNICAL DATA
JIG SAW
SROM1195
Rated Voltage
230-240V, 50Hz
Input Power
800W
No-load Speed
n
o
0-3000/min
Max Cutting Depth
Wood: 80mm
Steel: 10mm
Angle Cuts
Up to 45°(left and right)
Manufactured in China for
:
The Warehouse Limited
The Warehouse Way, Northcote, Auckland
0800 422 274
