background image

9 ENGLISH

Adjusting cutting head angle

CAUTION:

 

Make sure the cutting head is 

secured in the position after adjusting the cutting 

head angle. 

Otherwise the cutting head may rotate 

during operation and cause serious injury.

Rotate the cutting head while pushing the rotation 

button.

Release the rotation button when the cutting head is in 

the desired angle.

1

►    

1.

 Rotation button

Cutting operation

CAUTION:

 

Wear gloves. 

Edges and chips of the 

workpiece are sharp and may cause injury.

Secure the workpiece firmly. Move the tool forward 

keeping the side blades flush with the workpiece 

surface.

1

2

►    

1.

 Side blade 

2.

 Workpiece

MAINTENANCE

CAUTION:

 

Always be sure that the tool is 

switched off and the battery cartridge is removed 

before attempting to perform inspection or 

maintenance.

NOTICE:

 

Never use gasoline, benzine, thinner, 

alcohol or the like. Discoloration, deformation or 

cracks may result.

To maintain product SAFETY and RELIABILITY, 

repairs, any other maintenance or adjustment should 

be performed by Makita Authorized or Factory Service 

Centers, always using Makita replacement parts.

OPTIONAL 

ACCESSORIES

CAUTION:

 

These accessories or attachments 

are recommended for use with your Makita tool 

specified in this manual.

 The use of any other 

accessories or attachments might present a risk of 

injury to persons. Only use accessory or attachment 

for its stated purpose.

If you need any assistance for more details regard

-

ing these accessories, ask your local Makita Service 

Center.
• 

Hex wrench (5/32")

• 

Makita genuine battery and charger

NOTE:

 Some items in the list may be included in the 

tool package as standard accessories. They may 

differ from country to country.

MAKITA LIMITED WARRANTY

Please refer to the annexed warranty sheet for the 

most current warranty terms applicable to this product. 

If annexed warranty sheet is not available, refer to the 

warranty details set forth at below website for your 

respective country.

United States of America: www.makitatools.com

Canada: www.makita.ca

Other countries: www.makita.com

Summary of Contents for XSJ03





















Reviews: