33 ESPAÑOL
2.
Coloque la junta del sujetador en la herramienta y
luego coloque el sujetador de la manguera en la junta
del sujetador.
1
2
►
1.
Junta del sujetador
2.
Sujetador de la manguera
3.
Instale la cubierta contra polvo y la manguera en
la herramienta y luego fije la manguera a los sujetado
-
res de la manguera.
1
2
3
3
►
1.
Cubierta contra polvo
2.
Manguera
3.
Sujetador
de la manguera
4.
Conecte la manguera a la manguera de la aspira-
dora con la junta de la manguera.
NOTA:
Si la manguera no viene incluida, conecte la
cubierta contra polvo a la junta de la aspiradora o a la
manguera ø28 Makita.
5.
Ajuste la distancia entre la cubierta contra polvo y
la punta del cincel o cincel de punta. La distancia reco-
mendada es de 30 mm (1-3/16″) a 100 mm (3-15/16″).
(1)
►
(1)
30 mm (1-3/16″) a 100 mm (3-15/16″)
OPERACIÓN
PRECAUCIÓN:
Utilice siempre la empuña-
dura lateral (mango auxiliar) y sujete firmemente
la herramienta tanto de la empuñadura lateral
como del mango del interruptor durante las
operaciones.
PRECAUCIÓN:
Asegúrese siempre de que
la pieza de trabajo quede asegurada antes de la
operación.
PRECAUCIÓN:
No jale hacia afuera la herra-
mienta con demasiada fuerza aun si la punta
se atora. La pérdida de control podría causar
lesiones.
NOTA:
Si el cartucho de batería se encuentra a baja
temperatura, la herramienta podría no alcanzar su
máxima capacidad. En este caso, caliente el cartucho
de batería usando la herramienta sin carga durante
un rato a fin de lograr que la herramienta alcance su
máxima capacidad.
Summary of Contents for XRH07
Page 43: ...43 ...