10 ENGLISH
9.
Insert the protrusion on the shear blades to the
hole on the rod, then align the position of the felt pad
with the holes on the tool, and then attach new sleeves
and washers.
1
2
3
4
5
►
1.
Protrusion
2.
Hole
3.
Felt pad
4.
Washer
5.
Sleeve
NOTICE:
Apply a small amount of grease to the
inner periphery of the hole of the rod.
NOTICE:
Be careful not to lose the washers and
the sleeves.
10.
Align the holes on the shear blades with the holes
on the tool, and then tighten 2 screws to fix the shear
blades.
1
2
►
1.
Screw
2.
Hole
11.
Attach the rod.
1
2
►
1.
Rod
2.
Small hole
NOTICE:
Apply a small amount of grease to the
inner periphery of the small hole of the rod.
NOTICE:
Make sure that the protrusion on the
shear blades fits in the small hole on the rod.
12.
Attach the plate.
1
2
►
1.
Protrusion
2.
Plate
NOTICE:
Make sure that the protrusion on the
shear blades fits in the hole on the plate.
13.
Attach the cover, and then tighten 6 screws.
2
1
►
1.
Cover
2.
Screw
Summary of Contents for XHU06
Page 31: ...31 ...