Makita XGT GCV09 Instruction Manual Download Page 19

19 ENGLISH

Emptying dust bag

1.

  Close the rubber cap to prevent dust from floating 

out.

2.

  Open the bag mouth by pulling the fastener out.

3.

  Empty the dust bag of its contents, tapping it 

lightly so as to remove particles adhering to the insides.

1

2

3

Fig.44

►    

1.

 Dust bag 

2.

 Rubber cap 

3.

 Fastener

NOTICE:

 

Empty the dust bag frequently. 

Too 

much dust will tear the bag easily.

Cleaning the dust bag

Regularly clean the dust bag with soap and water. Turn 

the dust bag inside out and remove the sticky dust. 

Wash lightly by hand and rinse well with water. Dry 

completely before installing to the vacuum cleaner.

Fig.45

NOTICE:

 

Wet dust bag lowers the vacuuming 

performance as well as the life of the motor.

NOTICE:

 

When mounting the fastener on the 

dust bag, make sure that the bag mouth is 

securely closed.

CYCLONE ATTACHMENT

Optional accessory

1

Fig.46

►    

1.

 Cyclone attachment

About the cyclone attachment

Using the cleaner with the cyclone attachment installed 

reduces the amount of dust that enters the filter bag, 

which helps to prevent the suction force from weaken-

ing. In addition, cleaning after use is also simple.

CAUTION:

 

Always be sure that the tool is 

switched off and the battery cartridge is removed 

before carrying out any work on the tool.

 If the 

battery cartridge is left inserted, the cleaner may start 

unexpectedly and result in injury.

CAUTION:

 

Clean the mesh filter of the 

cyclone attachment and the filter bag of the 

cleaner unit when they become clogged.

 

Continued use in the clogged condition may result in 

heating or smoke.

NOTICE:

 

When the cyclone attachment is 

attached, do not use the cyclone attachment in 

the horizontal or upward facing condition.

 Doing 

so may cause the mesh filter to become clogged.

NOTICE:

 

Always use the cleaner with the fil

-

ter bag installed, even when using the cyclone 

attachment.

 Using the cleaner without the filter bag 

installed may result in a motor malfunction.

NOTE:

 Check that the cyclone attachment, cleaner, 

and straight pipe are locked properly before use.

NOTE:

 Empty the dust case of the cyclone attach-

ment and the filter bag of the cleaner when dust has 

accumulated. Continued use will result in weakened 

suction force.

Summary of Contents for XGT GCV09

















































Reviews: