Makita WUT02U, Instruction Manual, Page: 7 / 9

7 ENGLISH
Description of the lamp status
Refer to the below table for the meaning of the lamp status.
► Fig.9: 1. Wireless activation lamp 2. Channel number indicator 3. Caution lamp
Lamp Status Color
On Blinking
Duration Description
Wireless
activation
lamp
Standby Blue Adaptor: con -
tinuing
Tool: 2 hours
Waiting for the tool registration or the wireless
activation function is available.
The lamp on the adaptor blinks when the stand-by
switch on the vacuum cleaner is set to “AUTO” or
equivalent.
The lamp on the tool blinks when the wireless
activation button is pushed. The lamp on the tool
will automatically turn off when no operation is
performed for 2 hours.
When the tool is
running.
The wireless activation of the vacuum cleaner is
available and the tool is running.
Tool
registration
Green 20 seconds Ready for the tool registration. Searching the tool to
be registered.
2 seconds The tool registration has been finished. The wireless
activation lamp will start blinking in blue.
Cancelling/
erasing
tool
registration
Red
(slow: 2 times/sec.)
20 seconds Ready for the cancellation of the tool registration.
Searching the tool to be cancelled.
(fast: 5 times/sec.)
When the
wireless acti-
vation button is
pressed down.
Ready to erase all tool registrations.
2 seconds The tool registration has been cancelled/erased.
The wireless activation lamp will start blinking in
blue.
Others Red 3 seconds The power is supplied to the wireless unit and the
wireless activation function is starting up.
Off - - The stand-by switch on the vacuum cleaner is not
set to “AUTO” or equivalent.
Channel
number
indicator
Channel
number
selection
Green Continuing The lighted channel number is selected.
Testing Green 15 seconds The adaptor is testing the communication to the
vacuum cleaner through the selected channel
number.
Caution
lamp
Overheated
or other
trouble
Red Continuing The adaptor is overheated or in other trouble.
Unplug the adaptor from the vacuum cleaner. Clean
the vents on the adaptor and cool it down for a while
and then check if it works properly.
If the adaptor does not work properly, contact our
authorized service center for repairs.