15 ENGLISH
Hose hook
When you suspend the operation, the hook on the bent
pipe assembly can be used for hanging the wand on the
lower belt.
►
Fig.12:
1.
Hook
2.
Lower belt
ASSEMBLY
CAUTION:
Always be sure that the appli-
ance is switched off and the battery cartridge
is removed before carrying out any work on the
appliance.
Assembling hose
Insert the hose cuff into the vacuum cleaner body and
turn it clockwise.
►
Fig.13:
1.
Hose cuff
2.
Vacuum cleaner body
Using as a cleaner
Attaching bent pipe assembly
Optional accessory
NOTE:
You don't need to perform this procedure
if your model comes with the bent pipe assembly
attached to the hose.
NOTE:
There are two types of bent pipe assembly;
the one for slide-type extension wand and the one for
ring-type extension wand. If you prepare the bent pipe
assembly, choose the one for your desired extension
wand type.
The bent pipe assembly is used for connecting the
extension wand or nozzle for vacuum cleaning to this
product.
If you want to use this product as the vacuum cleaner,
attach the bent pipe assembly to the hose.
To attach, unscrew the front cuff from the hose and
fasten the sleeve of bent pipe assembly onto the hose.
To remove, loosen the sleeve of bent pipe assembly
from the hose.
►
Fig.14:
1.
Hose
2.
Bent pipe assembly
3.
Sleeve
Assembling nozzle and wand
Optional accessory
NOTE:
The type of the nozzle and wand included in
the product varies depending on countries. In some
countries, the nozzle and wand are not included.
1.
Twist and insert the nozzle to the extension wand.
►
Fig.15:
1.
Extension wand
2.
Free nozzle
3.
T-shape nozzle
4.
T-shape nozzle (slim)
NOTE:
By twisting the nozzle while inserting, the noz-
zle can be attached to the extension wand securely.
NOTE:
For the model with ø38 mm hose and front
cuff 38, attach the supplied nozzle to the aluminum
bending pipe / aluminum straight pipe.
2.
Follow the procedures below, depending on the
type of the extension wand :
NOTE:
The slide-type extension wand and the ring-
type extension wand are not compatible with each
other. If you want to change the slide-type extension
wand to the ring-type extension wand or vice versa,
change the bent pipe assembly also.
For the slide-type extension wand
Shoulder the vacuum cleaner body then insert the
extension wand into the bent pipe assembly until it
clicks. To disconnect, extract the extension wand with
pressing the button.
►
Fig.16:
1.
Bent pipe assembly
2.
Button
3.
Slide-
type extension wand
The length of the wand can be adjusted.
With pressing the slide button, adjust the wand length.
The length is locked when releasing the slide button.
►
Fig.17:
1.
Slide button
For the ring-type extension wand
Shoulder the vacuum cleaner body then twist and insert
the extension wand into the bent pipe assembly. To
disconnect, twist and extract it.
►
Fig.18:
1.
Bent pipe assembly
2.
Ring-type exten-
sion wand
3.
Free nozzle
NOTE:
The free nozzle can be attached to the bent
pipe assembly without pipe lock directly.
The length of the wand can be adjusted.
Loosen the ring on the wand and adjust the wand
length. Tighten the ring at your desired length.
►
Fig.19:
1.
Ring
For the aluminum bending pipe / aluminum straight
pipe
(Only for the model with ø38 mm hose and front cuff 38)
Shoulder the vacuum cleaner body then twist and insert
the pipe into the front cuff. To disconnect, twist and
extract it.
►
Fig.20:
1.
Front cuff 38
2.
Aluminum bending pipe
3.
Aluminum straight pipe
4.
Nozzle
For the two aluminum straight pipes
Shoulder the vacuum cleaner body then twist and insert
the pipes. To disconnect, twist and extract it.
►
Fig.21:
1.
Bent pipe assembly
2.
Aluminum straight
pipe 1
3.
Aluminum straight pipe 2
Summary of Contents for VC008GZ
