5 ENGLISH
Mixer safety warnings
1.
Hold the tool with both hands at the intended
handles.
Loss of control can cause personal injury.
2.
Ensure sufficient ventilation when mixing flam
-
mable materials to avoid a hazardous atmo-
sphere.
Developing vapour may be inhaled or be
ignited by the sparks the power tool produces.
3.
Do not mix food.
Power tools and their accesso-
ries are not designed for processing food.
4.
Keep the cord away from the working area.
The
cord may be entangled by the mixer blade.
5.
Ensure that the mixing container is placed in a
firm and secure position.
A container that is not
properly secured may move unexpectedly.
6.
Ensure that no liquid splashes against the housing
of the power tool.
Liquid that has penetrated the power
tool can cause damage and lead to electric shock.
7.
Follow the instructions and warnings for the mate-
rial to be mixed.
Material to be mixed may be harmful.
8.
If the power tool falls into the material to be
mixed, unplug the tool immediately and have
the power tool checked by a qualified repair
person.
Reaching into the bucket with the tool still
plugged in can lead to electric shock.
9.
Do not reach into the mixing container with
your hands or insert any other objects into it
while mixing.
Contact with the mixer blade may
lead to serious personal injury.
10.
Start up and run down the tool in the mixing
container only.
The mixer blade may bend or spin
in an uncontrolled manner.
11.
Ensure that no liquid splashes against the hous-
ing of the power tool.
Liquid that has penetrated
the power tool can cause damage to the tool.
12.
Use auxiliary handles, if supplied with the tool.
Loss of control may cause personal injury.
13.
Hold the power tool by insulated gripping sur-
faces, when performing an operation where the
cutting accessory may contact hidden wiring or
its own cord.
Cutting accessory contacting a "live"
wire may make exposed metal parts of the power tool
"live" and could give the operator an electric shock.
14.
Always be sure you have a firm footing. Be sure no
one is below when using the tool in high locations.
15.
Hold the tool firmly.
16.
Keep hands away from rotating parts.
17.
Do not leave the tool running. Operate the tool
only when you are holding it.
18.
Some materials contain chemicals which may
be toxic. Take caution to prevent dust inhala-
tion and skin contact. Follow safety warnings
by supplier of the material.
19.
When performing the mixing operation, place the
mixing container on a flat and stable surface.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity
with product (gained from repeated use) replace
strict adherence to safety rules for the subject
product. MISUSE or failure to follow the safety
rules stated in this instruction manual may cause
serious personal injury.
FUNCTIONAL
DESCRIPTION
CAUTION:
Always be sure that the tool is
switched off and unplugged before adjusting or
checking function on the tool.
Switch action
CAUTION:
Before plugging in the tool, always
check to see that the switch trigger actuates
properly and returns to the "OFF" position when
released.
for European countries
►
Fig.1:
1.
Switch trigger
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
for other than European countries
►
Fig.2:
1.
Lock button
2.
Switch trigger
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
For continuous operation, pull the switch trigger and
then push in the lock button.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
Indicator lamp
►
Fig.3:
1.
Indicator lamp
The green power-ON indicator lamp lights up when the
tool is plugged to the mains. If the indicator lamp is lit
but the tool does not start even if the tool is switched
ON, the carbon brushes may be worn out, or the motor
or the switch may be defective. If the indicator lamp
does not light up, the mains cord or the indicator lamp
may be defective. When the mains cord is defective, the
tool neither starts nor lights the indicator lamp. When
the indicator lamp is defective, the tool starts without
the indicator lamp lighting up.
ASSEMBLY
CAUTION:
Always be sure that the tool is
switched off and unplugged before carrying out
any work on the tool.
Installing the shaft
1.
Tighten the shaft into the shaft holder till the hex
nut contacts with the shaft holder.
►
Fig.4:
1.
Hex nut
2.
Shaft
3.
Shaft holder
2.
Hold the notch in the shaft holder with wrench 19
so that it cannot revolve. With the notch held so, tighten
the hex nut with another wrench 19 in the direction of
arrow.
►
Fig.5:
1.
Wrench 19
2.
Notch
3.
Wrench 19
