8 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
UR008G
Handle type
Loop handle
No load speed
(at each rotation speed level)
3: 0 - 5,000 min
-1
2: 0 - 4,600 min
-1
1: 0 - 4,000 min
-1
Overall length
(without cutting tool and battery)
1,803 mm
Nylon cord diameter
2.0 - 2.4 mm
Applicable cutting tool and
cutting diameter
Nylon cutting head
(P/N 197993-1)
430 mm
Plastic blade
(P/N 198383-1)
(P/N 199868-0)
255 mm
305 mm
Rated voltage
D.C. 36 V - 40 V max
Net weight
5.0 - 5.7 kg
Protection degree
IPX4
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi
-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
BL4020 / BL4025* / BL4040* / BL4050F*
* : Recommended battery
Charger
DC40RA / DC40RB / DC40RC
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended cord connected power source
Portable power pack
PDC01 / PDC1200
•
The cord connected power source(s) listed above may not be available depending on your region of residence.
•
Before using the cord connected power source, read instruction and cautionary markings on them.
Noise
Applicable standard : ISO22868(ISO11806-1)/EN50636-2-91
Cutting tool
Sound pressure level (L
pA
) dB(A) Sound power level (L
WA
) dB(A)
L
pA
dB(A)
Uncertainty (K)
dB(A)
L
WA
dB(A)
Uncertainty (K)
dB(A)
Nylon cutting head
79.0
1.6
91.9
1.6
•
Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB
(A). Wear ear protection.
NOTE:
The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE:
The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
Summary of Contents for UR008G
