[2] LUBRICATION
[1] NECESSARY REPAIRING TOOLS
DISASSEMBLING
Fig. 1
Fig. 4
Fig. 5
Fig. 6
Fig. 2
Fig. 3
Fig. 7
Fig. 8
Code No.
Description
1R035 Bearing setting plate 15.2
Removing Helical gear 67
1R269 Bearing extractor
Removing Bearing box complete
Use for
Protector
Pin 4
Helical gear 67
Pliers
Front grip
Front
grip
Housing R
Plane bearing 8
Flat washer 8
Spindle
Spindle
Screws (2pcs.)
Shift Front grip ends out.
Housing L
Shear blade complete
Helical gear 67
CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”.
R
epair
Apply Makita grease N. No.2 to the following portion to protect parts and product from unusual abrasion.
(1) Gear room (5g: Refer to
Fig. 6
.)
(2) Crank portion of Shear blade complete (2g: Refer to
Fig. 8
)
(3) Contact portion of Spindle bottom end and Plan bearing 8 (a little: Refer to
Fig
.
8
)
(1) Turn the machine upside down and keep it in a horizontal position using Front handle. (
Fig. 1
)
(2) Remove two Screws and Protector. (
Fig. 1
)
(3) Remove two Screws on Front grip (
Fig. 2
) and then push both ends of Front grip with Switch lever B. (
Fig. 3)
Front grip with Switch lever B can be separated from Housing set.
(4) Remove fourteen Screws and Housing R (
Fig. 4
)
(5) Remove Pin 4 (2pcs) from Shear blade complete. (
Fig. 5
)
(6) Turn Helical gear 67 to the direction of Blade top, and Helical gear 67 itself and Blade crank portion will rise up
from the original position.(
Fig. 6
)
Note
:
Use Blade cover and gloves when you hold Shear blade complete so as not to pinch your finger.
(7) Remove Plane bearing 8 and Flat washer 8 from Spindle. (
Fig. 7)
Shear blade complete and Nylon sleeve 5 (2pcs) can be removed from Spindle and Helical gear 67. (
Fig. 8)
Switch
lever B
Both ends
of Front
grip
portion
Screws
(2pcs.)
Shear
blade
complete
Shear blade
complete
Nylon sleeve 5 (2pcs.)
Tapping screw 4x18
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Shear blade complete and Front grip
P 2/ 7