9 ENGLISH
Intended use
The tool is intended for trimming hedges.
Noise
Applicable standard : EN62841-4-2
Model
Sound pressure level
Sound power level
L
pA
(dB(A))
Uncertainty K
(dB(A))
L
WA
(dB(A))
Uncertainty K
(dB(A))
UH004G
85
3
96
3
UH005G
86
3
97
3
UH006G
81
3
92
3
UH007G
81
3
92
3
UH008G
82
3
93
3
UH009G
83
3
94
3
NOTE:
The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE:
The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual use of the power tool can differ from the declared val
-
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
Vibration
The vibration total value (tri-axial vector sum) determined according to EN62841-4-2:
Model
Front handle
Rear handle
ah (m/s
2
)
Uncertainty K
(m/s
2
)
ah (m/s
2
)
Uncertainty K
(m/s
2
)
UH004G
2.9
1.5
2.5 or less
1.5
UH005G
3.1
1.5
2.7
1.5
UH006G
3.0
1.5
2.5 or less
1.5
UH007G
3.4
1.5
3.1
1.5
UH008G
3.1
1.5
2.5 or less
1.5
UH009G
3.2
1.5
2.5
1.5
NOTE:
The declared vibration total value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE:
The declared vibration total value(s) may also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power tool can differ from the declared
value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
Summary of Contents for UH004G
