7
Cutter length
inch (mm)
17.7 (450)
20.4 (520)
Blade cycles (n
o
)
n/min
1500
Dimensions (length / width / height)
inch (mm) 36.5 (928) / 8.4 (215) / 7.8 (200) 39.1 (995) / 8.4 (215) / 7.8 (200)
Weight
lb (kg)
7.72 (3.5)
7.94 (3.6)
Technical Data
UH 5550
UH 6350
Service
The maintenance and repair of modern hedge trimmers and their safety devices require qualified technical training and a workshop
equipped with special tools and test instruments.
We therefore recommend that you consult a MAKITA service center for all work not described in this instruction manual.
The MAKITA service centres have all the necessary equipment and skilled and experienced personnel, who can work out cost-
effective solutions and advise you in all matters.
Please contact your nearest service centre.
Spare parts
Reliable long-term operation, as well as the safety of your hedge trimmer, depend among other things on the quality of the spare
parts used. Use only original MAKITA parts, marked
Only original spare parts and accessories guarantee the highest quality in material, dimensions, function and safety.
Original spare parts and accessories can be obtained from your local dealer. He will also have the spare parts lists to determine the
required spare part numbers, and will be constantly informed about the latest improvements and parts innovations.
Please bear in mind that if parts other than original MAKITA spare parts are used, this will automatically invalidate the MAKITA product
guarantee.
Guarantee
MAKITA guarantees the highest quality and will therefore reimburse all costs for replacement of damaged parts resulting from
material or production faults occurring within the guarantee period after purchase.
Please note that in some countries special guarantee conditions may exist. If you have any questions, please contact your salesman,
who is responsible for the guarantee of the product.
Please note that we cannot accept any responsibility for damage caused by:
•
Failure to observe the instructions in the Instruction Manual.
•
Non-performance of the required maintenance and cleaning.
•
Normal wear and tear.
•
The use of unapproved extension power cords.
•
The use of force, improper use, misuse or accidents.
•
Overheating damage caused by blockage of the ventilation slots.
•
Work on the hedge trimmer by unskilled persons or inappropriate repairs.
•
Use of unsuitable spare parts or parts other than original MAKITA parts, insofar as they caused the damage.
•
Damage related to conditions arising from lease or rent contracts.
Cleaning, servicing and adjustment work is not covered by the guarantee. All repairs covered by the guarantee must be performed
by a MAKITA service center.
