![background image](http://html.mh-extra.com/html/makita/ua001g/ua001g_instruction-manual_229189022.webp)
22
ENGLISH
TROUBLESHOOTING
Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual,
do not attempt to dismantle the tool. Instead, ask Makita Authorized Service Centers, always using Makita replace-
ment parts for repairs.
Malfunction status
Cause
Action
The tool does not start.
Battery cartridge is not installed.
Install a charged battery cartridge.
Battery problem (low voltage).
Recharge the battery cartridge. If recharg-
ing is not effective, replace the battery
cartridge.
Main power switch is off.
The tool is automatically turned off if it is
un-operated for a certain period. Turn on
the main power switch again.
The motor stops running after a little use.
Battery's charge level is low.
Recharge the battery cartridge. If recharg-
ing is not effective, replace the battery
cartridge.
No oil on the chain.
Oil tank is empty.
Fill the oil tank.
Oil guide groove is dirty.
Clean the groove.
The tool does not reach maximum RPM.
Battery cartridge is installed improperly.
Install the battery cartridge as described in
this manual.
Battery power is dropping.
Recharge the battery cartridge. If recharg-
ing is not effective, replace the battery
cartridge.
The drive system does not work correctly.
Ask the authorized service center in your
region for repair.
The main power lamp is blinking in green.
Switch trigger is pulled under an unoperat-
able condition.
Pull the switch trigger after the main power
switch is turned on.
Abnormal vibration:
Stop the tool immediately!
Loose guide bar or saw chain.
Adjust the guide bar and saw chain
tension.
Tool malfunction.
Ask the authorized service center in your
region for repair.
The saw chain cannot be installed.
The combination of saw chain and
sprocket is not correct.
Use the correct combination of saw chain
and sprocket by referring to the section for
specifications.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual.
The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
•
Saw chain
•
Guide bar
•
Guide bar cover
•
File
•
Makita genuine battery and charger
WARNING:
If you purchase a guide bar of
different length from the standard guide bar, also
purchase a suitable guide bar cover together. It
must fit and fully cover the guide bar on the tool.
NOTE:
Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
Summary of Contents for UA001G
