background image

9 ENGLISH

Checking remaining staples

3

2

1

►    

1.

 Sight window 

2.

 Pusher 

3.

 Staples

Remaining staples can be checked through the sight 

window.

Reload staples when no remaining staples can be seen 

in the sight window.

Removing jammed staples

WARNING:

 

Always make sure that the battery 

cartridge is removed before removing jammed 

staples.

Open the sub magazine backward and take out jammed 

staples from the opening for firing.

1

2

►    

1.

 Opening 

2.

 Sub magazine

MAINTENANCE

CAUTION:

 

Always be sure that the tool is 

switched off and the battery cartridge is removed 

before attempting to perform inspection or 

maintenance.

NOTICE:

 

Never use gasoline, benzine, thinner, 

alcohol or the like. Discoloration, deformation or 

cracks may result.

To maintain product SAFETY and RELIABILITY, 

repairs, any other maintenance or adjustment should 

be performed by Makita Authorized or Factory Service 

Centers, always using Makita replacement parts.

OPTIONAL 

ACCESSORIES

CAUTION:

 

These accessories or attachments 

are recommended for use with your Makita tool 

specified in this manual.

 The use of any other 

accessories or attachments might present a risk of 

injury to persons. Only use accessory or attachment 

for its stated purpose.

If you need any assistance for more details regard-

ing these accessories, ask your local Makita Service 

Center.
• 

Staples

• 

Makita genuine battery and charger

• 

Safety goggles

• 

Depth adjuster set

NOTE:

 Some items in the list may be included in the 

tool package as standard accessories. They may 

differ from country to country.

Summary of Contents for ST113DZ













Reviews: