11
Safety instructions
Makita SK103P
en
GB
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
M
TR
Responsibilities of the person in charge of the
instrument:
The person in charge of the instrument has the following
duties:
•
To understand the safety instructions on the product
and the instructions in the User Manual.
•
To be familiar with local safety regulations relating to
accident prevention.
Hazards in use
CAUTION:
Watch out for erroneous measurements if the
instrument is defective or if it has been dropped or has
been misused or modified.
Carry out periodic test measurements.
Particularly after the instrument has been subject to
abnormal use, and before, during and after important
measurements.
Refer to section "Checking the accuracy".
WARNING:
Flat batteries must not be disposed of with house-
hold waste. Care for the environment and take
them to the collection points provided in accordance
with national or local regulations.
The product must not be disposed of with the
household waste.
Dispose of the product appropriately
in accordance with the national regulations in
force in your country.
Always prevent access to the product by unau-
thorised personnel.
WARNING
Using a battery charger not recommended by Makita
can destroy the batteries. This can cause fire or explosions.
Precautions:
Only use chargers recommended by Makita to charge
the batteries.
Electromagnetic Compatibility (EMC)
WARNING:
The SK103P conforms to the most stringent
requirements of the relevant standards and regulations.
Yet, the possibility of it causing interference in other
devices cannot be totally excluded.
FCC statement (applic. in U.S.)
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interfer-
ence in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accor-
