[3] DISASSEMBLY/ASSEMBLY
[3] -3. Toolless Blade Holder Section (Model JR100D) (cont.)
ASSEMBLING
Fig. 14
Holes for
Shoulder pin 5
Shoulder pin 5
Compression spring 6
Guide sleeve
3. Mount Guide sleeve to Blade guide.
And align the holes each other for easy
assembling of Shoulder pin 5 and Pin 3
in the next step.
4. Insert Compression spring 6 and Shoulder pin 5 into the large hole
of Guide sleeve.
Insert Pin 3 into the small hole of another side of Guide sleeve.
Guide sleeve
Pin 3
Fig. 16
7. While pressing Shoulder pin 5,
assemble Driving sleeve.
Note; Locate this gray portion to
Shoulder pin 5 and mount
Driving sleeve to Guide sleeve.
Note; These concaves on
Connecting sleeve fit to the inner
projection of Driving sleeve.
Driving sleeve
Inner projection
Fig. 15
5. Press down Push pin with Slotted screwdriver
till it stops while pushing Shoulder pin 5.
6. And then, remove Slotted
Screwdriver.
So, Push pin is pushed back
by Compression spring 2 and
fits to Shoulder pin 5.
Shoulder
pin 5
Shoulder
pin 5
Push pin
Guide
sleeve
Connecting
sleeve
Pin 3
Slotted
screwdriver
Slotted
screwdriver
Compression spring 2
Blade guide
(2) Do further step for Assembling in the order of
Fig. 14
,
15
,
16
,
17
,
18
.
P
8
/ 1
2
R
epair
