P
6
/ 1
0
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-3. Switch lever
DISASSEMBLING
ASSEMBLING
Disassemble Switch lever and Switch knob. (
Fig. 10
)
Assemble Switch lever and switch knob. (
Fig. 11
)
3. Bending Switch lever, pull it
out from Motor housing.
1. Blocking Switch knob to OFF position
by putting 1R281, strongly push
Switch lever as illustrated below.
2. Linkage of Switch knob is now
disconnected from Switch lever.
Switch knob can be removed.
Switch knob
Motor
housing
Switch knob
Switch
knob
2. Fit the hook of Switch Knob
to the hole of Switch lever.
Switch lever
Switch lever
1R281
Switch lever
Fig. 10
Fig. 11
Switch
Switch
Rear end of
Switch lever
1. Insert Switch lever into Motor housing
until the hole of Switch lever comes
into sight through Switch knob
assembling hole on Motor housing.
And keep this position.
Motor
housing
Hook of
Switch knob
Front end of
Switch lever
