P 3/ 10
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Coupling, Spindle
Fig. 3
Fig. 4
Fig. 5
DISASSEMBLING
ASSEMBLING
4. Turn Spindle counterclockwise with Wrench 13 while holding Coupling
with Hex box bit 17.
6. Drive the removed Coupling in Spindle again
about
2 pitches
for utilizing it as a removing tool.
7. Push Coupling by hand towards the front end of
Barrel complete, and remove Spindle together with
Ball bearing 6001LLB and Retaining ring S-12;
in this step, Ball bearing 629LLB remains in
Barrel complete.
(2) Remove Coupling from Spindle, then separate Spindle from Barrel complete. (
Figs. 3
,
4
)
(3) Remove Retaining ring S-12 and Ball bearing 6001LLB from Spindle. (
Fig. 5
)
Coupling
Hex socket
bit 17
Spindle
Wrench 13
Spindle
Do the reverse of the disassembling steps.
8. Remove Ball bearing 629LLB from the rear end of
Barrel complete.
Coupling
5. The Coupling disconnected from
Spindle remains in Hex box bit 17.
Ball bearing
6001LLB
Ball bearing
6001LLB
Retaining
ring S-12
BGD0800 (LXDG01)
Retaining
ring S-12
Ball bearing
6291LLB
[front end]
[rear end]
Spindle
Retaining ring
S-12
Barrel complete
Drive Coupling
about 2 pitches
in Spindle again.
Ball bearing
6001LLB
Ball bearing
629LLB
[front end]
[rear end]