(3)ASSEMBLY OF SAFETY COVER
1) Insert Spiral spring 26 into the oval hole in Safety cover , making spring's tip meet the hole.
2) Making Center washer meet four bosses in Safety cover , and attach it. (See Fig.1)
3) By putting the tip of Spiral spring 26 into Center cover hole, attach Center cover as shown in Fig. 2.
4) Attach Center plate, making it meet four bosses in Safety cover, and tighten it with Pan head screw M5.
Oval hole in Safety cover
Spiral spring 26
Flat washer 5
Pan head screw M5
Spiral spring 26
Center cover hole
Center washer
Center plate
Center cover
Fig. 1
Fig. 2
(5) Fastrening of Hex bolt M8 on teh Turn Base
Hex Lock Nut M8 has to be so fastened that the turn base can move smoothly without trembling.
Hex. lock nut M8
Turn base
Base
Lock lever
Hex. lock nut M8
Turn base
Base
Lock lever
Safety Cover
