8 ENGLISH
Disposing of dust for high
performance filter
In order to drop dust sticking on the filter in the capsule,
tap the capsule 4 or 5 times with your hand.
Now point suction inlet downwards, turn capsule in direction of
arrow in diagram, and disconnect capsule slowly and straight.
2
1
►
1.
Capsule
2.
Suction inlet
NOTE:
Dust may spill out when capsule is opened, so
be sure to set a garbage bag beneath capsule.
Remove accumulated dust from inside of capsule and
off of high performance filter.
1
2
►
1.
Capsule
2.
High performance filter
Twist high performance filter in direction of arrow to
unfasten securing lip from cleaner unit and then pull off
the filter.
1
►
1.
Securing lip
Clean out the fine dust and lightly tap to dislodge dust
from high performance filter.
Reassembly
Reassembly for normal filter
Put on the filter fully in position on the cleaner unit.
1
►
1.
Filter
NOTICE:
Make sure the filter is put on straight
without being peeled back.
If the filter is put on
incorrectly as illustrated, dust will get into the motor
housing, and cause a motor failure.
1
►
1.
Filter
Install the prefilter. At this time, make sure to twist the
prefilter so that the securing lip is firmly locked in the
cleaner unit.
2
1
►
1.
Prefilter
2.
Securing lip