Makita LC02, Instruction Manual

Page: 7 / 32

7
1
011530
5. Place the dust stopper and the dust pack together
into the cleaner cavity in the same direction of
arrow on the dust stopper. Insert them all the way
into the slots in the cleaner cavity.
011529
6. Place the entire container part of the dust pack
inside the tool itself.
7. Close the front cover completely.
CAUTION:
•
Forgetting to install the dust bag or the dust pack,
failure to insert the dust stopper together with the
dust bag or the dust pack all the way into the slots
or using a broken or ripped bag, may allow dust to
get into the motor. This may result in motor failure.
•
Do not fold the cardboard at its opening when
installing the paper pack, .
•
Never throw away the dust stopper because it need
to be used repeatedly whenever either the dust bag
or the dust pack is used.
•
The paper pack for the cleaner is an important
component for maintaining the tool performance.
Using other than the genuine paper pack may
cause smokes or ignition.
OPERATION
CAUTION:
•
To connect attachments, such as nozzle,
twist-insert attachment in direction of arrow to
ensure secure connection during use. To
disconnect attachment, twist-extract also in
direction of arrow.
011520
Cleaning (Suction)
Nozzle
Attach the nozzle to clean off tables, desks, furniture, etc.
Nozzle slips on easily.
1
011521
Extension wand (Straight pipe)
The extension wand fits in between the nozzle and the
cleaner itself. This arrangement is convenient for
cleaning a floor while standing erect.
1
2
3
011522
Corner nozzle
Fit on the corner nozzle for cleaning corners and crevices
of a car or furniture.
1
2
011523
1. Cleaner
2. Corner nozzle
1. Cleaner
2. Nozzle
3. Extension wand
1. Nozzle
1. Cleaner cavity