7
010030
Connect capsule. Align projection on
capsule with projection on handle and then
firmly twist capsule in direction of arrow until
it is secured.
010031
1
2
3
010032
NOTE:
•
Always remove dust ahead of time, as
suction power will be reduced if there is
too much dust in cleaner.
•
Always be sure to check that both filter
and prefilter are loaded correctly prior to
using cleaner. If they are not loaded
correctly, dust will get into the motor
housing, and cause motor failure.
If the following examples occur, filter
and prefilter are not loaded correctly.
Reload them correctly to rectify
problem.
Problem Examples
Example 1: Only prefilter has been loaded
(no filter)
1
010033
Example 2: Only filter has been loaded (no
prefilter)
1
010034
Example 3: Filter has been loaded in a
peeled back state
1
010028
Example 4: Prefilter's securing lip is not
firmly locked into groove of cleaner housing
1
2
3
010036
1. Groove of
cleaner housing
2. Prefilter
3. Securing lip
1. Filter
1. Filter
1. Prefilter
1. Capsule
2. Handle
3. Projection
Summary of Contents for LC01
Page 31: ...31 ...