[3] DISASSEMBLY/ASSEMBLY
[3]-1. Base (cont.)
DISASSEMBLING
(4) Disassemble the components of Base. See
Fig. 5
.
1. Remove the following screws and washers from Base.
2. Remove Depth guide and Bracket.
3. Remove Angular plate.
4. Pull out 6-7 Shoulder pin, and then remove
Angular guide from Angular plate.
M6x12 Thumb screw
M6x16
Thumb screw
Spring
washer 6
Spring washer 6
Flat
washer 6
M6x21
Thumb screw
M4x8 Pan
head screw
( 2 pcs.)
Plate
Bracket
M4x8 Countersunk
head screw (4 pcs.)
Angular plate
Flat washer 6
Depth guide
M5X8 Hex socket set screw (for fixing 6-7 Shoulder pin)
M5x8 Hex socket
set screw
M5x12 Countersunk head screw (5 pcs.)
Assemble by reversing the disassembly procedure. Refer to
Figs. 5
,
4
,
3 and 2
.
Note
: Bow stop ring E-12 and Lever plate in Depth guide section have to be assembled as drawn in
Fig. 6
.
6-7 Shoulder pin
Angular guide
Angular plate
Fig. 5
Fig. 6
ASSEMBLING
Lever plate
30° or less
Setting of Bow stop ring E-12
Depth guide
Flat washer 8
Right direction
Bow stop ring E-12
Wrong direction
Assembling of Lever plate
The angle of Lever plate has to be placed
between 0° to 30°.
P 5/ 11
R
epair