12 ENGLISH
ASSEMBLY
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
Hex wrench storage
When not in use, store the hex wrench as shown in the
figure to keep it from being lost.
1
Fig.16
►
1.
Hex wrench
Installing sub base
Install the sub base and tighten the clamping screws
securely as shown in the figure.
Always use the tool with the sub base unless when
using the guide rail.
1
2
Fig.17
►
1.
Clamping screw
2.
Sub base
Installing or removing circular saw
blade
CAUTION:
Be sure the circular saw blade is
installed with teeth pointing up at the front of the
tool.
CAUTION:
Use only the Makita wrench to
install or remove the circular saw blade.
1.
Loosen the lever on the depth guide and move the
base down.
1
Fig.18
►
1.
Lever
2.
Install the inner flange, ring (country specific),
circular saw blade, outer flange and hex bolt. At this
time, align the direction of the arrow on the blade with
the arrow on the tool.
For tool without the ring
1
2
4
5
6
3
Fig.19
►
1.
Hex bolt
2.
Outer flange
3.
Circular saw blade
4.
Inner flange
5.
Arrow on the circular saw blade
6.
Arrow on the tool
