![background image](http://html.mh-extra.com/html/makita/hr2460/hr2460_instruction-manual_231104003.webp)
3
ENGLISH (Original instructions)
Explanation of general view
1-1. Switch trigger
1-2. Lock button
2-1. Lamp
3-1. Reversing switch lever
4-1. Action mode changing knob
5-1. Grip base
5-2. Side grip
5-3. Loosen
5-4. Tighten
5-5. Teeth
5-6. Protrusion
6-1. Bit shank
6-2. Bit grease
7-1. Bit
7-2. Chuck cover
8-1. Bit
8-2. Chuck cover
9-1. Depth gauge
10-1. Dust cup
11-1. Blow-out bulb
12-1. Chuck adapter
12-2. Keyless drill chuck
13-1. Sleeve
13-2. Ring
13-3. Quick change drill chuck
SPECIFICATIONS
Model HR2460/HR2460F
Tungsten-carbide tipped bit
24 mm
Core bit
54 mm
Concrete
Diamond core bit (dry type)
65 mm
Steel 13
mm
Capacities
Wood 32
mm
No load speed (min
-1
)
0 - 1,100
Blows per minute
0 - 4,500
Overall length
362 mm
Net weight
2.8 kg
Safety class
/II
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
ENE042-1
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
ENF002-1
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
ENG102-2
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA
) : 90 dB(A)
Sound power level (L
WA
) : 101 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG217-2
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode : hammer drilling into concrete
Vibration emission (a
h,HD
) : 15.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG301-1
Work mode : drilling into metal
Vibration emission (a
h,D
) : 4.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
•
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
•
The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
•
Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
Summary of Contents for HR2460
Page 43: ...43 ...
Page 44: ...44 Makita Corporation Anjo Aichi Japan 884705B971 ...