Makita HR2450 Series, Parts List

Page: 4 / 5

4 Model HR2450
SERVICE NOTE
Follow these steps when replacing the Inner Housing Com and the Change Plate.
1. Remove Gear Housing Cover.
2. Remove Tool Holder section.
3. Remove two M4x12 Hex. Socket Head Bolts. (Fig. 1)
All steps for removal of re-use parts have now been completed.
7. Replace the current Inner Housing complete by the new one.
8. Apply 5g of Makita Grease RA No.1 as (Fig. 6)
4. Remove Shaft portion and Piston Cylinder. (Fig. 2)
6. Remove O-Ring 24 and O-Ring 68. (Fig. 4)
Fig. 1
Fig. 2
Fig. 4
Fig. 6
5. Remove Change Plate. (Fig. 3)
Fig. 3