![background image](http://html1.mh-extra.com/html/makita/hr2440f/hr2440f_technical-information_4189634009.webp)
R
epair
P 9 / 14
6. Swash bearing section can not be disassembled in one action by pressing cam shaft with arbor press, because
Take the following steps for disassembling them.
1. Disassemble ring 8 by pressing with arbor press as illustrated in Fig. 9.
2. Disassemble ball bearing 608ZZ with bearing extractor as illustrated in Fig. 9A.
3. Disassemble flat washer 8 and bearing retainer as illustrated in Fig. 9B.
4. Disassemble helical gear 26 by pressing with arbor press as illustrated in Fig. 9C.
1R022 Bearing
extractor plate
1R023 Bearing
extractor ring
Ring 8
Ring 8
1R236 Round bar
for arbor
1R236 Round bar
for arbor
Ball bearing
608ZZ
Ball bearing
606ZZ
Flat washer 8
Bearing retainer
Helical
gear 26
Swash
bearing 10
Clutch cam
Fig. 9
Fig. 9A
Fig. 9B
Fig. 9C
Fig. 9D
Fig. 9E
5. After disassembling helical gear 26, swash bearing 10, clutch cam, compression spring 12 and flat washer 12
can be separated from spur gear 10 as illustrated in Fig. 9.
6. Disassemble ball bearing 606ZZ with bearing extractor as illustrated in Fig. 9E.
Compression
spring 12
Flat washer 12
Spur gear 10
Ball bearing
606ZZ