![background image](http://html1.mh-extra.com/html/makita/hr2021/hr2021_technical-information_4165363002.webp)
R
epair
P 2 / 18
< 1 > Lubrication
Apply the following MAKITA grease to protect parts and product from unusual abrasion.
* Grease RA No.1(Brown) to the portions marked with black triangle
* Grease FA No.2 to the portions marked with gray triangle
Cap 35
Change lever
Spur gear 51
Piston cylinder
Gear housing
Needle baring
O ring 17
O ring 68
Piston joint
Inner housing
Helical gear 26
Spur gear 10
Clutch cam
Swash bearing
Tool holder
Steel ball 7.0
Change lever
O ring 17
Piston cylinder
O ring 68
Inner housing
Helical gear 26
Spur gear 10
Swash bearing 10
Tool holder
Steel ball 7.0
Cap 35
Inner lip of bit inserting side
Inner ring
Inner portion where contacts tool holder
Convex portion of cam
Inner portion where contacts piston cylinder
The portion where contacts inner housing
Inner portion where contacts striker
The portion where piston joint is assembled
Inner portion where contacts tool holder
The groove where O ring 68 is assembled
Inner portion where contacts cam shaft
The surface where contacts helical gear 26
The portion where balls are installed
Convex portion of cam
Spline portion
Top of the pins
Whole part
Whole part
Whole part
Inner portion where the mechanical parts are installed.
Groove for O ring 17 assembling portion
Spur gear 51
Gear housing
Needle bearing
Grease RA No.1 (Brown)
Grease RA No.1 (Brown)
Grease RA No.1 (Brown)
Grease RA No.1 (Brown)
Grease RA No.1 (Brown)
Grease RA No.1 (Brown)
Grease RA No.1 (Brown)
Grease RA No.1 (Brown)
Grease RA No.1 (Brown)
Grease RA No.1 (Brown)
Grease FA No.2
Grease RA No.1 (Brown) : 60g
Grease FA No.2
Grease RA No.1 (Brown)
Whole of teeth portion