Makita GSE2200, Instruction Manual, Page: 8 / 18

8
Figure for sharpening ( Fig. 4 )
Sharpening angle
WARNING
When re-positioning the counter-blade support pipe, make especially sure that there is a
space of no less than 2 mm between the counter-blade and the blade (Figure 5).
Fig. 5
After completing assembly, make sure that the feeder pipe rests firmly against the
shredder body and is properly connected via the knob shown in Fig. 2 point A (position 1
to lock) and the side hooks (Fig. 2 point B); then check the rotation to see whether the
machine is working smoothly. When the blades are worn due to harsh working conditions
or repeated sharpening, you must install new blades.