4 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
GS5000
GS6000
Applicable grinding wheel
Max. wheel diameter
125 mm
150 mm
Max. wheel thickness
20 mm
Spindle thread
M14 or 1/2″ (country specific)
Max. spindle length
41 mm
No load speed (n
0
) / Rated speed (n)
5,600 min
-1
Overall length
With support cover
590 mm
Without support cover
588 mm
Net weight
5.0 - 5.2 kg
5.2 - 5.4 kg
Safety class
/II
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s). The lightest and heaviest combination, according to
EPTA-Procedure 01/2014, are shown in the table.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Wear safety glasses.
Always operate with two hands.
DOUBLE INSULATION
Only for EU countries
Due to the presence of hazardous compo
-
nents in the equipment, used electrical and
electronic equipment may have a negative
impact on the environment and human
health.
Do not dispose of electrical and electronic
appliances with household waste!
In accordance with the European Directive
on waste electrical and electronic equip
-
ment and its adaptation to national law,
used electrical and electronic equipment
should be collected separately and
delivered to a separate collection point
for municipal waste, operating in accor
-
dance with the environmental protection
regulations.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.
Intended use
The tool is intended for grinding ferrous materials or
deburring castings.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted noise level determined according to EN62841-2-3:
Model
Sound pressure
level (L
pA
) : (dB(A))
Sound power level
(L
WA
) : (dB(A))
Uncertainty (K) :
(dB(A))
GS5000
83
94
3
GS6000
83
94
3