Makita GA049G, Instruction Manual

Page: 2 / 24

2 ENGLISH
SPECIFICATIONS
Model: GA048G GA049G GA050G GA051G
Applicable grinding wheel Max. wheel diameter 100 mm 115 mm 125 mm 150 mm
Max. wheel thickness 6.4 mm 7.2 mm 6.4 mm
Applicable cut-off wheel
Max. wheel diameter 105 mm 115 mm 125 mm 150 mm
Max. wheel thickness 3.2 mm 3.0 mm
Applicable wire wheel brush Max. wheel diameter 100 mm 115 mm 125 mm
Max. wheel thickness 20 mm
Spindle thread M10
M14 or 5/8″ (country specific)
Max. spindle length 18 mm 23 mm
No load speed (n
0
) / Rated speed (n)
11,000 min
-1
9,000 min
-1
Overall length (with BL4040)
410 mm
Net weight 2.8 - 5.2 kg 3.0 - 5.4 kg 3.1 - 4.7 kg
Rated voltage D.C. 36 V - 40 V max
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi
-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL4020 / BL4025* / BL4040* / BL4050F* / BL4080F
* : Recommended battery
Charger
DC40RA / DC40RB / DC40RC
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended cord connected power source
Portable power pack PDC01 / PDC1200
• The cord connected power source(s) listed above may not be available depending on your region of residence.
• Before using the cord connected power source, read instruction and cautionary markings on them.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Wear safety glasses.
Always operate with two hands.
Do not use the wheel guard for cut-off
operations.
Ni-MH
Li-ion
Only for EU countries
Due to the presence of hazardous com-
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and batteries may have a negative impact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household
waste!
In accordance with the European Directive
on waste electrical and electronic equip-
ment and on accumulators and batteries
and waste accumulators and batteries,
as well as their adaptation to national law,
waste electrical equipment, batteries and
accumulators should be stored separately
and delivered to a separate collection point
for municipal waste, operating in accor-
dance with the regulations on environmen-
tal protection.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.