9 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
GA027G
GA028G
GA029G
GA030G
GA031G
GA032G
Wheel diameter
100 mm (4")
115 mm
(4-1/2")
125 mm (5") 100mm (4")
115 mm
(4-1/2")
125 mm (5")
Max. wheel thickness
6.4 mm
7.2 mm
6.4 mm
7.2 mm
Spindle thread
M10
M14 or 5/8"
(country specific)
M10
M14 or 5/8"
(country specific)
Rated speed (n)
8,500 min
-1
Overall length
with BL4025
413 mm
with BL4040
425 mm
Net weight
2.9 - 3.4 kg
3.0 - 3.6 kg
3.0 - 4.5 kg
2.8 - 3.4 kg
2.9 - 3.6 kg
3.0 - 4.4 kg
Rated voltage
D.C. 36 V - 40 V max
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi
-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
BL4025 / BL4040
Charger
DC40RA
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Wear safety glasses.
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col
-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for grinding, sanding, wire brushing
and cutting of metal and stone materials without the use
of water.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool.
Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1.
Keep work area clean and well lit.
Cluttered or
dark areas invite accidents.
Summary of Contents for GA031G
Page 2: ...1 2 3 Fig 1 1 2 Fig 2 1 Fig 3 1 2 Fig 4 1 Fig 5 Fig 6 1 3 2 Fig 7 2 ...
Page 5: ...1 1 4 4 2 3 Fig 22 1 1 4 4 2 3 Fig 23 1 Fig 24 1 Fig 25 2 1 Fig 26 Fig 27 Fig 28 Fig 29 5 ...
Page 6: ...Fig 30 Fig 31 Fig 32 1 Fig 33 1 4 2 3 Fig 34 2 3 1 Fig 35 1 Fig 36 6 ...
Page 7: ...1 1 2 2 Fig 37 Fig 38 1 Fig 39 1 2 Fig 40 1 Fig 41 1 Fig 42 7 ...