background image

1

ENGLISH

FRANÇAISE

ESPAÑOL

FOREWORD

Thank you very much for purchasing a 

MAKITA GENERATOR

.

This manual covers operation and maintenance of the 

MAKITA GENERATOR

.

This 

MAKITA GENERATOR

can be used for general electrical equipments, appliances, lamps, tools as an

AC power source. With regards to DC application, the terminals are used only for charging 12 volt battery.
Never use this generator for any other purposes.

Please take a moment to familiarize yourself with the proper operation and maintenance procedures in order
to maximize the safe and efficient use of this product.
Keep this owner’s manual at hand, so that you can refer to it at any time.
Due to constant efforts to improve our products, certain procedures and specifications are subject to change
without notice.

When ordering spare parts, always give us the 

MODEL, PRODUCTION NUMBER (PROD No.)

and 

SERIAL NUMBER (SER No.)

of your Product.

Please fill in the following blanks after checking the production number on your product.
(Location of label is different depending on the product model.)

CONTENTS

1. SAFETY PRECAUTIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2. COMPONENTS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 
3. CONTROLS AND INDICATORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4. PRE-OPERATION CHECKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5. OPERATING PROCEDURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 
6. WATTAGE INFORMATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
7. SPARK ARRESTER  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
8. MAINTENANCE SCHEDULE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 
9. "HOW-TO" MAINTENANCE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

10. PERIODIC OPERATION AND INSPECTION  . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
11. TRANSPORTING  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
12. PREPARATION FOR STORAGE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
13. TROUBLESHOOTING  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
14. SPECIFICATIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
15. WIRING DIAGRAM  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

PROD No. SER No.
(Label)

Please refer to the illustrations on the back page of the front cover or back cover
for Fig. 

1

1

to 

6

6

indicated in the sentence.

NOTE

G1700I(CSA)̲GU1979  05.1.26  10:53 AM  ページ1

Summary of Contents for G1700I

























Reviews: