31
Extract from the spare parts list
Use only original MAKITA parts. For repairs and
replacement of other parts, see your MAKITA service centre.
EK7300
EK7301
EK8100
Pos. MAKITA-No. Qty. Denomination
Synthetic resin cutting disc
1
966 121 150
1
Cutting disc for steel, dia. 300/20 mm
966 141 150
1
Cutting disc for steel, dia. 350/20 mm
966 144 150
1
Cutting disc for steel, dia. 350/25,4 mm
966 161 050
1
Cutting disc for steel, dia. 400/20 mm
1
966 121 120
1
Cutting disc for masonry, dia. 300/20 mm
966 141 120
1
Cutting disc for masonry, dia. 350/20 mm
966 144 120
1
Cutting disc for masonry, dia. 350/25,4 mm
966 161 120
1
Cutting disc for masonry, dia. 400/20 mm
3
994 280 250
1
Hex screw M8x25
4
965 300 470
1
V-belt (for EK7300, EK7301)
4a 965 300 481
1
V-belt (for EK8100)
5
963 601 122
1
Suction head
6
181 114 202
1
Tank cap, compl. (fuel)
8
395 173 020
1
Inner
Þ
lter
9
395 173 011
1
Air
Þ
lter insert (paper cartridge)
10 395 173 081
1
Pre-
Þ
lter (foam)
11 965 603 021
1
Spark plug
12 122 164 010
1
Starter cable ø 4,0x1000 mm
13 001 161 020
1
Starter grip
14 181 163 050
1
Return spring in housing
15 923 208 004
2
Hexagonal nut M8
16 941 719 140
1
Universal wrench SW 13/19
17 940 827 000
1
Offset screwdriver T27
18 944 340 001
1
Screwdriver (carburetor)
19 395 174 140
1
Spark arrester screen
Accessories
(not delivered with the Power Cut)
Diamond cutting disc
22 966 . . . . . .
1
Please consult your MAKITA dealer!
-
394 228 121
1
Adapter ring, dia. 20/25,4 mm
24 957 114 200
1
Angle fuel-tank
Þ
ller neck, cpl.
25 394 369 600
1
Guide trolley DT2010 cpl.
26 957 802 600 1
Pressure water tank, cpl.
27 394 365 102
1
Mains water connection, cpl.
28 394 114 271
1
Stand with rollers, complete
(included only with EK8100, but without items 29, 30, 31)
29 394 114 240
2
Bushing
30 394 114 230
2
Roller
31 908 006 355
2
Star-head screw
32 908 905 165
4
Star-head screw
-
949 000 035
1
Combined can (for 5l fuel, 2.5l oil)
EU Conformity Declaration
The undersigned, Tomoyasu Kato, as authorized by MAKITA Corporation, declare that the MAKITA machines,
Type:
395, 328
Power Cut EK7300, EK7301 (
395),
EK8100
(328)
manufactured by MAKITA Corporation, 3-11-8 Sumiyoshi-Cho, Anjo, Aichi, 446-8502 Japan, conforms to the basic safety and health
requirements of the applicable EU Directives:
EU Machinery Directive 2006/42/EG, EU EMC Directive 2004/108/ EG, Outdoor Noise Directive 2000/14/EG.
The most important standards applied to properly meet the requirements of the above EU Directive were: EN 19432, CISPR 12, EN
ISO 14982, DIN EN 61000-4. The conformity assessment procedure 2000/14/EG was performed per Annex V. The measured noise
level (L
wa
) is 114 dB(A). The guaranteed noise level (L
d
) is 115 dB(A).
The technical documentation is on
Þ
le at MAKITA International Europe Ltd., Michigan Drive, Tongwell, Milton Keynes, Bucks, MK15
8JD, England.
Anjo, 1.10.2012 for MAKITA Corporation
Tomoyasu Kato
Managing Director
