![background image](http://html.mh-extra.com/html/makita/ebh340r/ebh340r_instruction-manual_223031010.webp)
10
CONNECTION OF SWITCH CORD
– Connect the switch cords to the two cords from the engine by
inserting one into the other.
– Fix the cord connector by clamp (7).
ADJUSTMENT OF CONTROL CABLE
– Adjust the control cable by adjusting bolt so that it will have 1 to
2 mm play when the throttle lever is set to the low-speed
position by carburetor adjusting bolt. (Be careful that the cutter
blade will not turn in idling.)
Make the throttle wire and I-O switch cords go along the flexible
pipe and fix three point them on clip wire (8) tightly. If you do not
fix the throttle wire and I-O switch cords surely, there is fear that
they catch on the branch and so on it is dangerous.
Summary of Contents for EBH340R
Page 22: ...MEMO ...
Page 23: ......
Page 24: ...6119522700 08 02 Makita Corporation 3 11 8 Sumiyoshi cho Anjo Aichi 446 8502 Japan ...