11 ENGLISH
DUR188U
Nylon cutting head
2.5
1.5
2.5
1.5
Plastic blade
2.5
1.5
2.5
1.5
DUR188L
Nylon cutting head
2.5
1.5
2.5
1.5
Plastic blade
2.5
1.5
2.5
1.5
NOTE:
The declared vibration emission value has been measured in accordance with the standard test method
and may be used for comparing one tool with another.
NOTE:
The declared vibration emission value may also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power tool can differ from the declared emission
value depending on the ways in which the tool is used.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation of
exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when
the tool is switched off and when it is running idle in addition to the trigger time).
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Take particular care and attention.
Read instruction manual.
Danger; be aware of thrown objects.
The distance between the tool and
bystanders must be at least 15 m.
360°
Keep bystanders away.
15m(50
FT
)
Keep distance at least 15 m.
Wear a helmet, goggles and ear protection.
Wear protective gloves.
Wear sturdy boots with nonslip soles.
Steeltoed safety boots are recommended.
Do not expose to moisture.
Top permissible tool speed.
Never use metal blade.
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material! In observance of the European
Directives, on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
SAFETY WARNINGS
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
Read all safety warnings and all
instructions.
Failure to follow the warnings and instruc-
tions may result in electric shock, fire and/or serious injury.
Save all warnings and instruc-
tions for future reference.
1.
Be familiar with the controls and proper use of
the equipment.
2.
Cutting elements continue to rotate after the
motor is switched off.
3.
Never allow children or people unfamiliar with
the instructions to use the machine.
4.
Stop using the machine while people, espe-
cially children, or pets are nearby.
5.
Only use the machine in daylight or good artificial light.
6.
Before using the machine and after any impact, check
for signs of wear or damage and repair as necessary.
7.
Take care against injury from any device fitted for
trimming the filament line length. After extending
new cutter line always return the machine to its
normal operating position before switching on.
8.
Never fit metal cutting elements.
9.
This appliance is not intended for use by per-
sons (including children) with reduced physical,
sensory or mental capabilities, or lack of expe
-
rience and knowledge, unless they have been
given supervision or instruction concerning use
of the appliance by a person responsible for
their safety. Children should be supervised to
ensure that they do not play with the appliance.
10.
Use the tool with the utmost care and attention.
Summary of Contents for DUR187U
