7 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model
DUH551
DUH651
Blade length
550mm
650 mm
Strokes per minute (min
-1
)
1,000 - 1,800
Overall length
1,065 mm
1,135 mm
Rated voltage
D.C. 36 V
Net weight
4.6 - 5.3 kg
4.7 - 5.5 kg
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi
-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
Charger
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended battery adapter and cord connected battery pack
Battery adapter
BAP182 / PDC01
Cord connected battery pack
BL36120A / PDC1200
•
The battery adapter(s) and cord connected battery pack(s) listed above may not be available depending on
your region of residence.
•
Before using the battery adapter and cord connected battery pack, read instruction and cautionary markings on
them.
Noise
The typical A-weighted noise level determined accord
-
ing to EN62841-4-2:
Model DUH551
Sound pressure level (L
pA
) : 80 dB(A)
Uncertainty (K) : 3 dB(A)
Sound power level (L
WA
) : 91 dB (A)
Uncertainty (K) : 3 dB(A)
Model DUH651
Sound pressure level (L
pA
) : 80 dB(A)
Uncertainty (K) : 3 dB(A)
Sound power level (L
WA
) : 91 dB (A)
Uncertainty (K) : 3 dB(A)
NOTE:
The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE:
The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING:
Be sure to identify safety mea
-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Summary of Contents for DUH551
