![background image](http://html1.mh-extra.com/html/makita/duc101sf/duc101sf_instruction-manual_3992512002.webp)
2 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
DUC101
Overall length
(without guide bar and battery)
357 mm (14″)
Rated voltage
D.C. 18 V
Net weight
*1
1.1 kg (2.4 lbs)
*2
1.6 - 2.0 kg (3.5 - 4.4 lbs)
Standard guide bar length
100 mm (4″)
Recommended guide bar length
100 mm (4″)
Applicable saw chain type
(refer to the table below)
80TXL
Sprocket
Number of teeth
7
Pitch
0.325″
Chain speed
0 - 8.0 m/s
(0 - 480 m/min)
(0 - 1,570 ft/min)
Chain oil tank volume
55 cm
3
(1.9 fl oz)
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
*1: Weight, without the saw chain, guide bar, guide bar cover, oil and battery cartridge(s).
*2: The lightest and heaviest combination of weight, according to EPTA-Procedure 01/2014. The weight may differ
depending on the attachment(s), including the battery cartridge(s).
Saw chain, guide bar, and sprocket combination
Saw chain type
80TXL
Number of drive links
26
Guide bar
Guide bar length
100 mm (4″)
Cutting length
111 mm (4-3/8″)
Part No.
162B84-9
Pitch
0.325″
Gauge
1.1 mm (0.043″)
Type
Hard nose bar
Sprocket
Number of teeth
7
Pitch
0.325″
WARNING:
Use appropriate combination of the guide bar and saw chain. Otherwise personal injury may
result.
Applicable battery cartridge and charger
Battery cartridge
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
Charger
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH / DC18WC
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.