![background image](http://html1.mh-extra.com/html/makita/dtw300rfj/dtw300rfj_instruction-manual_4062219008.webp)
8 ENGLISH
This tool has a reversing switch to change the direction of rota-
tion. Depress the reversing switch lever from the A side for clock-
wise rotation or from the B side for counterclockwise rotation.
When the reversing switch lever is in the neutral posi-
tion, the switch trigger cannot be pulled.
Changing the application mode
Changing the impact force
You can change the impact force in four steps: 4 (max), 3 (hard), 2 (medium), and 1 (soft).
This allows a tightening suitable to the work.
The level of the impact force changes every time you press the button
.
You can change the impact force within approximately one minute after releasing the switch trigger.
NOTE:
You can extend the time to change the impact force approximately one minute if you press the button
or .
Application mode
(Impact force grade
displayed on panel)
Maximum blows
Purpose
Example of application
4 (Max)
4,000 min
-1
(/min)
Tightening with the maximum force
and speed.
Assembling steel frames and tighten-
ing long screws or bolts.
3 (Hard)
3,400 min
-1
(/min)
Tightening with less force and speed
than Max mode (easier to control than
Max mode).
Assembling steel frames.
2 (Medium)
2,600 min
-1
(/min)
Tightening when a good finishing is
needed.
Assembling or disassembling scaf-
folds and frameworks.
1 (Soft)
1,800 min
-1
(/min)
Tightening with less force to avoid
screw thread breakage.
Assembling furniture.
: The lamp is on.