![background image](http://html.mh-extra.com/html/makita/dtw181/dtw181_instruction-manual_230497006.webp)
6 ENGLISH
Vibration
The
vibration
total
value
(tri-axial
vector
sum)
determined
according to EN62841-2-2:
Work
mode:
impact
tightening of
fasteners of
the
maxi-
mum
capacity
of
the
tool
Vibration emission (a
h
)
:
10.5
m/s
2
Uncertainty
(K)
:
1.5
m/s
2
NOTE:
The declared vibration emission value has
been measured in accordance with the standard test
method
and
may
be
used
for
comparing one
tool
with
another.
NOTE:
The declared vibration emission value may
also
be
used
in
a
preliminary assessment
of
exposure.
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared
emission value
depending on
the
ways
in
which
the
tool is used.
WARNING:
Be
sure
to
identify
safety
measures to
protect the operator that are based on an estimation
of
exposure in
the
actual
conditions of
use
(taking
account
of
all
parts
of
the
operating cycle
such
as
the times when the tool is switched off and
when it is running
idle
in
addition
to
the
trigger
time).
EC Declaration of Conformity
For European countries only
The
EC
declaration of
conformity is
included
as
Annex
A
to this instruction
manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings,
instructions, illustrations and specifications
provided with this power tool.
Failure to follow all
instructions listed
below
may
result
in
electric
shock,
fire
and/or
serious
injury.
Save all warnings and
instructions for future reference.
The
term
"power
tool"
in
the
warnings refers
to
your
mains-operated
(corded)
power
tool
or
battery-
operated (cordless) power
tool.
Cordless impact wrench safety
warnings
1.
Hold the power tool by insulated gripping
surfaces, when performing an operation
where the fastener may contact hidden wiring.
Fasteners
contacting a
"live"
wire
may
make
exposed
metal
parts
of
the
power
tool
"live"
and
could give the operator an electric shock.
2.
Wear ear protectors.
3.
Check the impact socket carefully for wear,
cracks or damage before installation.
4.
Hold the tool firmly.
5.
Keep hands away from rotating parts.
6.
Always be sure you have a firm footing. Be
sure no one is below when using the tool in
high locations.
7.
The proper fastening torque may differ
depending upon the kind or size of the bolt.
Check the torque with a torque wrench.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity
with product (gained from repeated use) replace
strict adherence to safety rules for the subject
product.
MISUSE or failure to follow the safety rules stated
in this instruction manual may cause serious
personal injury.
Important safety instructions for
battery cartridge
1.
Before using battery cartridge, read all
instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product
using battery.
2.
Do not disassemble battery cartridge.
3.
If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4.
If electrolyte gets into your eyes, rinse them
out with clear water and seek medical