![background image](http://html1.mh-extra.com/html/makita/dst112z/dst112z_instruction-manual_4283635008.webp)
8 ENGLISH
1.
Remove the battery cartridge.
2.
Press the locking lever and slide the sub maga
-
zine backward.
1
2
►
1.
Locking lever
2.
Sub magazine
3.
Load staples into the main magazine with their
feet facing up.
1
2
►
1.
Staples
2.
Main magazine
4.
After loading staples, push back the sub-maga-
zine in place until it clicks.
To remove staples, follow the installation procedures in
reverse.
Hook
CAUTION:
Do not hang the hook from the
waist belt.
Dropping the stapler, which is caused by
the hook accidentally coming out of place, may cause
unintentional firing and result in personal injuries.
The hook is convenient for temporarily hanging the tool.
This can be installed on either side of the tool.
To install the hook, insert it into a groove in the tool
housing on either side and then secure it with a screw.
To remove, loosen the screw and then take it out.
1
2
3
►
1.
Groove
2.
Hook
3.
Screw
OPERATION
Testing the safety system
WARNING:
Make sure all safety systems are
in working order before operation. Failure to do
so may cause personal injuries.
1
2
3
4
►
1.
Trigger-lock button
2.
Switch trigger
3.
Contact
element
4.
Sub magazine
Test safety systems for possible fault before operation
as following.
1.
Unload the tool with staples and keep the sub
magazine opened.
2.
Install the battery cartridge.
3.
Only pull the switch trigger without touching the
contact element against the material.
4.
Only touch the contact element against the mate-
rial without pulling the switch trigger.
If the tool operates in the case of 3 and 4 above, the
safety systems are faulty. Stop using the tool immedi-
ately and ask your local service center.
Summary of Contents for DST112Z
Page 11: ...11 ...