![background image](http://html1.mh-extra.com/html/makita/dls714/dls714_technical-information_4024383019.webp)
October 2015
3. Put Torsion spring 28 (118) into the groove on Front
arm complete (145).
4. File the scratch on Pin 16-90 (155) and apply Makita
grease FA No.2 a little on the circumference of Pin 16-90
(155).
Figure 24
5. Insert Pin 16-90 (155) into Front arm complete (145)
and Blade case complete (46) until Pin’s end comes to
the same level to the surface of Front arm complete
(145).
Figure 25
(145)
(155)
(155)
(46)
(145)
(118)
Flat
19 / 47