6 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model
DJV141
DJV181
Length of stroke
26 mm
26 mm
Max. cutting capacities
Wood
135 mm
135 mm
Mild steel
10 mm
10 mm
Aluminum
20 mm
20 mm
Strokes per minute (min
-1
)
800 - 3,500
800 - 3,500
Overall length
280 mm
298 mm
Net weight
2.2 - 2.5 kg
2.3 - 2.6 kg
Rated voltage
D.C. 14.4 V
D.C. 18 V
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi
-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
D.C.14.4 V Model
BL1415N / BL1430 / BL1430B / BL1440 / BL1450 / BL1460B
D.C.18 V Model
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
Charger
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.
Noise
The typical A-weighted noise level determined accord
-
ing to EN62841-2-11:
When soft no-load rotation function is enabled:
Sound pressure level (L
pA
) : 78 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
When soft no-load rotation function is disabled:
Sound pressure level (L
pA
) : 86 dB(A)
Sound power level (L
WA
) : 97 dB (A)
Uncertainty (K) : 3 dB(A)
NOTE:
The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE:
The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter
-
mined according to EN62841-2-11:
Work mode: cutting boards
Vibration emission (a
h,B
) : 6.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: cutting sheet metal
Vibration emission (a
h,M
) : 5.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Summary of Contents for DJV141
Page 2: ...1 2 3 1 1 2 1 1 2 1 1 2 Fig 7 1 Fig 1 Fig 2 Fig 3 Fig 4 Fig 5 Fig 6 Fig 8 2 ...
Page 3: ...1 2 1 2 2 1 1 2 1 1 2 1 2 Fig 9 Fig 10 Fig 11 Fig 12 Fig 13 Fig 14 Fig 15 Fig 16 3 ...
Page 4: ...1 2 3 1 2 3 4 5 6 1 2 3 1 1 1 2 3 Fig 17 Fig 18 Fig 19 Fig 20 Fig 21 Fig 22 Fig 23 Fig 24 4 ...
Page 5: ...1 2 3 1 2 1 2 3 Fig 25 Fig 26 Fig 27 Fig 28 Fig 29 5 ...
