![background image](http://html1.mh-extra.com/html/makita/dhr171rmj/dhr171rmj_instruction-manual_4083099009.webp)
9 ENGLISH
NOTE:
The standard side grip cannot be used
with the dust cup set being installed on the tool.
When the dust cup set is installed on the tool, remove
the grip from the standard side grip, and then attach it
to the optional grip base set.
Before installing the dust cup set, remove the bit from
the tool if installed.
Install the spacer so that the grooves on the spacer fit
in the protrusions on the tool barrel while widening it.
Be careful for the spring not to come off from the slit of
spacer.
1
2
►
1.
Spacer
2.
Spring
Install the side grip (optional grip base set and standard
grip) so that the groove on the grip fit in the protrusion
on the spacer. Turn the grip clockwise to secure it.
1
►
1.
Side grip
Install the dust cup set so that the claws of the dust cup
fit in in the slits on the spacer.
1
2
►
1.
Dust cup
2.
Claws
NOTE:
If you connect a vacuum cleaner to the dust
cup set, remove the dust cap before connecting it.
1
►
1.
Dust cap
To remove the drill bit, pull the chuck cover down all the
way and pull the drill bit out.
1
2
►
1.
Bit
2.
Chuck cover