3
ENGLISH (Original instructions)
Explanation of general view
1-1. Battery cartridge
1-2. Red part
1-3. Button
2-1. Switch trigger
3-1. Reversing switch lever
4-1. Lamp
4-2. LED indicator
5-1. Screw
6-1. Angle head
6-2. Ring
6-3. Scale
6-4. Compression spring
6-5. Yellow line
6-6. Hole for adjusting grip
6-7. Adjusting grip
8-1. Socket
8-2. Hole
8-3. Pin
SPECIFICATIONS
Model DFL300F
DFL400F/DFL401F
Hard joint
16 - 30 N • m
25 - 40 N • m
With battery
BH1427
Soft joint
16 - 30 N • m
25 - 40 N • m
Hard joint
16 - 30 N • m
25 - 40 N • m
Fastening torque
With battery
BL1430 / BL1440
Soft joint
16 - 27 N • m
25 - 38 N • m
Square drive
9.5 mm
9.5 mm
No load speed (min
-1
) 400
260
Dimensions
506 mm x 73 mm x 104 mm
510 mm x 73 mm x 104 mm
Net weight
1.9 kg
2.0 kg
Rated voltage
D.C. 14.4 V
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
ENE033-1
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
For Model DFL300F
ENG104-1
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA
) : 72 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
ENG204-2
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode: screwdriving without impact
Vibration emission (a
h
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
For Model DFL400F, DFL401F
ENG104-1
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA
) : 73 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
ENG204-2
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode: screwdriving without impact
Vibration emission (a
h
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
•
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
•
The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
