10
5
7
6
5
4
1
2
3
C
D
B
A
Put on the guide bar (
7
). Make sure that the pin (
5
) of the chain
tensioner engages in the hole in the guide bar.
Remove the plastic transport cover (*) and dispose of prop-
erly.
Turn chain tensioning screw (
4
) to the left (counter-clockwise)
until the pin (
5
) of the chain tensioner is underneath the threaded
pin (
6
).
Mounting the guide bar and saw chain
Use the universal wrench delivered with the chain saw for the
following work.
Put the chain saw on a stable surface and carry out the following
steps for mounting the guide bar and saw chain:
Release the chain brake by pulling the hand guard (
1
) in direc-
tion of arrow.
Unscrew retaining nuts (
2
).
Pull off the sprocket guard (
3
).
PUTTING INTO OPERATION
CAUTION:
Before doing any work on the guide bar or chain, always
switch off the engine and pull the plug cap off the spark
plug
(see „Replacing the spark plug“)
. Always wear protec-
tive gloves!
CAUTION:
Start the chain saw only after having assembled it com-
pletely and inspected.
