Makita DCS3500, Instruction Manual, Page: 32 / 40

32
16
Replacing the suction head
The felt Þ lter ( 16 ) of the suction head can become clogged.
It is recommended to replace the suction head once every
three months in order to ensure unimpeded fuel
ß ow to the
carburetor.
To remove the suction head for replacement, pull it out through
the tank
Þ ller neck using a piece of wire bent at one end to
form a hook.
15
15
Cleaning the air Þ lter compartment / fan com-
partment
Remove cover.
Remove the fan housing.
CAUTION: To prevent eye injury, always wear eye protection
when cleaning the
Þ lter with compressed air!
The entire area ( 15 ) can now be brushed clean or cleaned with
compressed air.
Cleaning the cylinder Þ ns
A bottle brush can be used to clean the cylinder Þ ns.